Reference projects
Feel free to contact us for more information or to work together on your next successful project - by email or phone call.
Feel free to contact us for more information or to work together on your next successful project - by email or phone call.
Jaworzno, Poland
XL3 channel penstock
The special fittings without housing are used in the cooling water circuit after the cooling tower. During maintenance work, they reliably prevent the cooling water from flowing back into the pump station and must therefore be driven reliably. The dimensions of the slides, higher torques and the longer operating times of more than two hours had to be mapped Which ultimately resulted in a completely new control technology
Important facts:
+ 4x XL3 channel penstock 5600 × 3600 mm
+ BEA©servo electric actuator - custom designed
Jaworzno, Poland
BEA©servo electric actuator
The special fittings without housing are used in the cooling water circuit after the cooling tower. During maintenance work, they reliably prevent the cooling water from flowing back into the pump station and must therefore be driven reliably. The dimensions of the slides, higher torques and the longer operating times of more than two hours had to be mapped Which ultimately resulted in a completely new control technology
Important facts:
+ 4x XL3 channel penstock 5600 × 3600 mm
+ BEA©servo electric actuator - custom designed
Jaworzno, Poland
XL3 channel penstock
The special fittings without housing are used in the cooling water circuit after the cooling tower. During maintenance work, they reliably prevent the cooling water from flowing back into the pump station and must therefore be driven reliably. The dimensions of the slides, higher torques and the longer operating times of more than two hours had to be mapped Which ultimately resulted in a completely new control technology
Important facts:
+ 4x XL3 channel penstock 5600 × 3600 mm
+ BEA©servo electric actuator - custom designed
Stuttgart-Mühlhausen, Germany
two-spindle channel penstocks
With two new gates in the beginning. The penstocks cannot be dismantled because the system has to be operated continuously. In cooperation with BROCHIER Anlagen- und Rohrtechnik GmbH and HKW Stuttgart-Mühlhausen, BÜSCH developed a special solution that enables the old gate penstocks to have an additional function , so that they can be used for inspections ease of fitting the new penstocks was critical due to space constraints, so on-site inspection and accurate sizing was essential for internal design.
Important facts:
+ 2x two-spindle channel penstocks 2000 mm × 3500 mm with a special frame for mounting in front of the existing fittings
+ lateral drive solution for two spindles
Stuttgart-Mühlhausen, Germany
two-spindle channel penstocks
With two new gates in the beginning. The penstocks cannot be dismantled because the system has to be operated continuously. In cooperation with BROCHIER Anlagen- und Rohrtechnik GmbH and HKW Stuttgart-Mühlhausen, BÜSCH developed a special solution that enables the old gate penstocks to have an additional function , so that they can be used for inspections ease of fitting the new penstocks was critical due to space constraints, so on-site inspection and accurate sizing was essential for internal design.
Important facts:
+ 2x two-spindle channel penstocks 2000 mm × 3500 mm with a special frame for mounting in front of the existing fittings
+ lateral drive solution for two spindles
Sösetalsperre, Germany
Stop gates 1000 x 1000 mm
Important facts:
+ SAFOX© DN 1000, DN 600 with spindle extension
+ Stop logs 1000 × 1000 mm & 1000 × 1150 mm with an installation depth of 8500 mm
+ Bar screen
Hassfurt, Deutschland
XL4 semicircular penstock with hand wheel
Wichtige Fakten:
+ XL4 semicircular penstock 900 × 900 mm, 1200 × 1200 mm with bracket headstocks
+ Hand wheel