Important facts:
+ XL4 penstock in different sizes
+ XL3 channel penstocks in different sizes
+ Stop logs

Important facts:
+8x SAFOX^© G penstock DN 1400, DN 1000
+7x SAFOX^© penstock DN 300, DN 800
+3x CP4 penstock 1200 × 600 mm

Important facts:
+8x SAFOX^© G penstock DN 1400, DN 1000
+7x SAFOX^© penstock DN 300, DN 800
+3x CP4 penstock 1200 × 600 mm

Wichtige Fakten:
+8x XL3 channel penstock from 1500 × 1500 to 3100 × 1950 mm
+3x XL4 penstock 2900 × 2900 mm, 2300 × 2300 mm
+19x CP4 penstock 400x 400 bis 1000 × 1950 mm
+8x CP4 weir type penstock 1200 × 1200 mm

Wichtige Fakten:
+8x XL3 channel penstock from 1500 × 1500 to 3100 × 1950 mm
+3x XL4 penstock 2900 × 2900 mm, 2300 × 2300 mm
+19x CP4 penstock 400x 400 bis 1000 × 1950 mm
+8x CP4 weir type penstock 1200 × 1200 mm

With two new gates in the beginning. The penstocks cannot be dismantled because the system has to be operated continuously. In cooperation with BROCHIER Anlagen- und Rohrtechnik GmbH and HKW Stuttgart-Mühlhausen, BÜSCH developed a special solution that enables the old gate penstocks to have an additional function , so that they can be used for inspections ease of fitting the new penstocks was critical due to space constraints, so on-site inspection and accurate sizing was essential for internal design.
Important facts:
+ 2x two-spindle channel penstocks 2000 mm × 3500 mm with a special frame for mounting in front of the existing fittings
+ lateral drive solution for two spindles

With two new gates in the beginning. The penstocks cannot be dismantled because the system has to be operated continuously. In cooperation with BROCHIER Anlagen- und Rohrtechnik GmbH and HKW Stuttgart-Mühlhausen, BÜSCH developed a special solution that enables the old gate penstocks to have an additional function , so that they can be used for inspections ease of fitting the new penstocks was critical due to space constraints, so on-site inspection and accurate sizing was essential for internal design.
Important facts:
+ 2x two-spindle channel penstocks 2000 mm × 3500 mm with a special frame for mounting in front of the existing fittings
+ lateral drive solution for two spindles